BMW 5 Series E39

since 1996-2001 release

Repair and operation of the car



BMW E39
+ Introduction
+ Maintenance instruction
+ Current leaving and service
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Care of a body
   Care of the finishing panels manufactured of vinyl
   Care of an upholstery and rugs of salon
   Repair of insignificant damages of body panels
   Repair of considerable damages of a body
   Body gaps
   Removal and installation of a front bumper
   Removal and installation of shock-absorbers of a front bumper
   Removal and installation of a rear bumper
   Removal and installation of the shock-absorber of a rear bumper
   Removal and installation of a forward wing
   Removal and installation of a cowl
   Adjustment of provision of a cowl
   Removal and installation of a trunk lid
   Adjustment of provision of a trunk lid
   Removal and installation of back facing of a luggage carrier
   Removal and installation of the lock of a cover of the luggage carrier/cylinder of the lock
   Removal and installation of a gas-filled emphasis of a cowl/trunk lid
   Replacement of a slip / company inscription
   Removal, installation and adjustment of a door
   Removal and installation of facing of a door
   Removal and installation of the door lock
   Removal and installation of the external handle of a door
   Removal and installation of the cylinder of the lock
   Removal and installation of the electric motor/microswitch of the uniform lock
   Removal, installation and adjustment of door glass
   Removal and installation of the power window
   Removal and installation of an external mirror
   Removal and installation of glass of a mirror
   Removal and installation of the case of an external mirror
   Removal and installation of an internal mirror
   Removal and installation of the central console
   Removal and installation of the electric motor of the movable panel of the hatch of a roof
   Removal and installation of a front seat
   Seat belt tension device
   Security measures at the handling of the belt tension device
   Protection of the device of a tension of a belt
   Removal and installation of a back seat
   Removal and installation of the shelf under a headdress
   Removal and installation of blinds of back glass
+ Onboard electric equipment
+ Schemes of electric equipment
+ System of onboard diagnostics




Removal and installation of the electric motor of the movable panel of the hatch of a roof

 REMOVAL

1. Take out a lamp of internal lighting by means of the small screw-driver. Rasstykuyte shtekerny connection.

2. Remove the screw-driver a peak. Rasstykuyte shtekerny connection of the switch.

3. Turn out Torx screws a head of 25 mm.

4. Take out the electric drive of the panel and a rasstykuyta shtekerny connection.


 INSTALLATION

1. Insert the electric drive of the panel and attach it. Fix it by two short screws (2) and one long (1) moment of 3 Nanometers. Use surely new screws. If there are no new screws, old grease with means for LOCTITE 270 fixing.

2. Join the switch plug, establish into place a cover.
3. Join shtekerny connection of a lamp of internal lighting and put it into place.

Initialization of the movable panel of the hatch of a roof

 PERFORMANCE ORDER

1. Install the panel in the provision of rise, press and hold the panel switch in the direction of "Hebestellung" ("The provision of rise").
2. Hold the switch in the provision of rise during 5 with:
   a) after each switching off of food or
   b) after adjustment of the panel.
3. Hold the switch in the provision of rise during 20 with:
   a) after malfunctions in work
   b) electric drive detachments
   c) works with hummock drives.
4. Initialization is considered finished if the switch is once again pressed in the Provision of Rise direction.