BMW 5 Series E39

since 1996-2001 release

Repair and operation of the car



BMW E39
+ Introduction
+ Maintenance instruction
- Current leaving and service
   Schedule of routine maintenance
   Introduction
   Current leaving
   General information on control
   Check of levels of liquids
   Check of a condition of tires and pressure in them
   Replacement of motive oil and oil filter
   Check and adjustment of turns of idling of the engine and SO level
   Replacement of an element of the air filter
   Replacement of the filter of air of salon
   Check of the brake system
   Visual control of the bottom and elements of a body
   Check of level of liquid of system of hydrostrengthening of a wheel
   Wheels and tires. Rotation, replacement, balancing and leaving. Snow chains. Sekretka of wheels. Elimination of trembling of a wheel
   Check of a state and replacement of hoses of a motive compartment
   Check of a condition of driving belts
   Check of a condition of the battery, care of it and charging. Replacement of a battery DU brelka
   Check and replacement of spark plugs
   Check of functioning of fuel system. Winter operation of the Diesel
   Check of functioning of the cooling system
   Check of a condition of system of production of the fulfilled gases
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts
   Lubricant of locking devices
   Visual check of seat belts
   Check of a state and replacement of brushes of screen wipers
   Replacement of brake fluid
   Cooling system liquid replacement. Check of frost resistance of a cooler. Visual check of the cooling system
   Removal of a sediment, replacement of the fuel filter. Removal of air from fuel system of the diesel engine
   Replacement of gearbox oil of a manual box of gear shifting
   Replacement of lubricant liquid of differential
   Check of thickness of the conducted clutch plate
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment
+ System of onboard diagnostics




Check of a condition of system of production of the fulfilled gases

Check has to be made at the cold engine therefore it is better to be engaged in it before a trip, the first for the present day, or not earlier than in three hours after switching off of the engine.

 CHECK

1. Check a condition of all system of release, beginning from the engine and finishing with a cut of an exhaust pipe. Ideally this inspection should be carried out at the car lifted on the winch when from below to it there is free access. If the winch is inaccessible, the car and reliably install to a poddomkratta it on support.
2. Check pipes and pipe connections for existence of signs of leaks, strong corrosion and damages. Check a state and reliability of fastening of all brackets and suspensions of system.
3. At the same time examine the car bottom on existence of holes, corrosion, the dispersed seams and other defects allowing penetration of the fulfilled gases into interior of the car. Close up all openings suitable sealant.
4. The system of release, especially its support and suspensions, often are a source of a roar and other unpleasant sounds.

5. Check rubber holders for existence of a time, having turned and having stretched them. If necessary replace them. Address an accompanying illustration.

6. Shake and pull pipes, mufflers and the catalytic converter (if it is provided). If these components adjoin to elements of a body or details of a suspension bracket, replace fixture of system of release.
7. Knock on the catalytic converter and check whether it adjoins to adjacent designs somewhere. If such contact is, weaken all bolts of fastening. Elements of the catalytic converter will take the places. After that fix the catalytic converter again.

Survey of an internal surface of an exhaust pipe allows to define the current working condition of the engine. The structure of deposits in a pipe speaks about quality of settings of the engine. If the pipe from within black and smoked, can indicate it that it is necessary to check fuel system carefully.