BMW 5 Series E39

since 1996-2001 release

Repair and operation of the car



BMW E39
+ Introduction
+ Maintenance instruction
- Current leaving and service
   Schedule of routine maintenance
   Introduction
   Current leaving
   General information on control
   Check of levels of liquids
   Check of a condition of tires and pressure in them
   Replacement of motive oil and oil filter
   Check and adjustment of turns of idling of the engine and SO level
   Replacement of an element of the air filter
   Replacement of the filter of air of salon
   Check of the brake system
   Visual control of the bottom and elements of a body
   Check of level of liquid of system of hydrostrengthening of a wheel
   Wheels and tires. Rotation, replacement, balancing and leaving. Snow chains. Sekretka of wheels. Elimination of trembling of a wheel
   Check of a state and replacement of hoses of a motive compartment
   Check of a condition of driving belts
   Check of a condition of the battery, care of it and charging. Replacement of a battery DU brelka
   Check and replacement of spark plugs
   Check of functioning of fuel system. Winter operation of the Diesel
   Check of functioning of the cooling system
   Check of a condition of system of production of the fulfilled gases
   Check of a condition of components of a suspension bracket and steering
   Check of a condition of protective covers of power shafts
   Lubricant of locking devices
   Visual check of seat belts
   Check of a state and replacement of brushes of screen wipers
   Replacement of brake fluid
   Cooling system liquid replacement. Check of frost resistance of a cooler. Visual check of the cooling system
   Removal of a sediment, replacement of the fuel filter. Removal of air from fuel system of the diesel engine
   Replacement of gearbox oil of a manual box of gear shifting
   Replacement of lubricant liquid of differential
   Check of thickness of the conducted clutch plate
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
+ Schemes of electric equipment
+ System of onboard diagnostics





Check of a state and replacement of brushes of screen wipers

On brushes of screen wipers the road film collects over time, reducing efficiency of their work therefore brushes should be washed out regularly in the soft cleaning solution.

Check

Assemblies of screen wipers with brushes have to look round regularly. If survey revealed existence of hardenings or cracks on rubber of brushes, replace brushes. If at survey nothing unusual is revealed, wet a windshield, include screen wipers, let's them work a little and switch off them. Or strips on pure glass indicate an uneven trace from brushes on glass that brushes should be replaced.

During operation of the mechanism of screen wipers there can be a weakening of fixing nuts therefore they should be checked and as necessary to tighten every time when checking brushes.

Replacement of brushes of screen wipers

 PERFORMANCE ORDER

1. Delay assembly of a screen wiper with a brush from glass.

 

2. Shift the slider and remove assembly of a brush from the screen wiper lever.

3. If you want to replace only rubber of brushes, disconnect the end of a brush from a brush frame, then pull out a brush from a frame.

4. Compare a new brush with old on length, a design, etc.
5. Establish a new brush into place, then frame its end of a brush to fix it.
6. Install assembly of a brush on the lever, then moisten glass and check work of a screen wiper.