BMW 5 Series E39

since 1996-2001 release

Repair and operation of the car



BMW E39
+ Introduction
+ Maintenance instruction
+ Current leaving and service
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Care of a body
   Care of the finishing panels manufactured of vinyl
   Care of an upholstery and rugs of salon
   Repair of insignificant damages of body panels
   Repair of considerable damages of a body
   Body gaps
   Removal and installation of a front bumper
   Removal and installation of shock-absorbers of a front bumper
   Removal and installation of a rear bumper
   Removal and installation of the shock-absorber of a rear bumper
   Removal and installation of a forward wing
   Removal and installation of a cowl
   Adjustment of provision of a cowl
   Removal and installation of a trunk lid
   Adjustment of provision of a trunk lid
   Removal and installation of back facing of a luggage carrier
   Removal and installation of the lock of a cover of the luggage carrier/cylinder of the lock
   Removal and installation of a gas-filled emphasis of a cowl/trunk lid
   Replacement of a slip / company inscription
   Removal, installation and adjustment of a door
   Removal and installation of facing of a door
   Removal and installation of the door lock
   Removal and installation of the external handle of a door
   Removal and installation of the cylinder of the lock
   Removal and installation of the electric motor/microswitch of the uniform lock
   Removal, installation and adjustment of door glass
   Removal and installation of the power window
   Removal and installation of an external mirror
   Removal and installation of glass of a mirror
   Removal and installation of the case of an external mirror
   Removal and installation of an internal mirror
   Removal and installation of the central console
   Removal and installation of the electric motor of the movable panel of the hatch of a roof
   Removal and installation of a front seat
   Seat belt tension device
   Security measures at the handling of the belt tension device
   Protection of the device of a tension of a belt
   Removal and installation of a back seat
   Removal and installation of the shelf under a headdress
   Removal and installation of blinds of back glass
+ Onboard electric equipment
+ Schemes of electric equipment
+ System of onboard diagnostics




Removal and installation of the lock of a cover of the luggage carrier / cylinder of the lock

 REMOVAL

1. Open a trunk lid and remove the lower facing. For this purpose take out rivets (1). Take out a peak (2) from an aperture of the handle and turn out the screw which is under it. Remove facing. Shooters on an illustration show the provision of clips. Replace the damaged clips.

2. Cut a collar of a cable and a rasstykuyta shtekerny connection.

3. Take out a bar (1).
4. Turn out nuts (2) and remove the cylinder of the lock (3).
5. Disconnect the top part of the lock of a trunk lid.


 INSTALLATION

1. Insert the top part of the lock of a trunk lid into place and fix it by screws. If the cylinder of the lock is replaced, rearrange the microswitch from the lock on new. For this purpose remove a spring bracket, take out the holder and remove the microswitch.
2. Connect a driving bar to the lock.
3. Connect electric wires and record a cable a new collar.
4. Put new facing on a trunk lid and fix it. Insert rivets and part them. Fix a peak.