BMW 5 Series E39

since 1996-2001 release

Repair and operation of the car



BMW E39
+ Introduction
+ Maintenance instruction
+ Current leaving and service
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Manual transmission
+ Automatic transmission
+ Coupling and power shafts
+ Brake system
+ Suspension bracket and steering
- Body
   Care of a body
   Care of the finishing panels manufactured of vinyl
   Care of an upholstery and rugs of salon
   Repair of insignificant damages of body panels
   Repair of considerable damages of a body
   Body gaps
   Removal and installation of a front bumper
   Removal and installation of shock-absorbers of a front bumper
   Removal and installation of a rear bumper
   Removal and installation of the shock-absorber of a rear bumper
   Removal and installation of a forward wing
   Removal and installation of a cowl
   Adjustment of provision of a cowl
   Removal and installation of a trunk lid
   Adjustment of provision of a trunk lid
   Removal and installation of back facing of a luggage carrier
   Removal and installation of the lock of a cover of the luggage carrier/cylinder of the lock
   Removal and installation of a gas-filled emphasis of a cowl/trunk lid
   Replacement of a slip / company inscription
   Removal, installation and adjustment of a door
   Removal and installation of facing of a door
   Removal and installation of the door lock
   Removal and installation of the external handle of a door
   Removal and installation of the cylinder of the lock
   Removal and installation of the electric motor/microswitch of the uniform lock
   Removal, installation and adjustment of door glass
   Removal and installation of the power window
   Removal and installation of an external mirror
   Removal and installation of glass of a mirror
   Removal and installation of the case of an external mirror
   Removal and installation of an internal mirror
   Removal and installation of the central console
   Removal and installation of the electric motor of the movable panel of the hatch of a roof
   Removal and installation of a front seat
   Seat belt tension device
   Security measures at the handling of the belt tension device
   Protection of the device of a tension of a belt
   Removal and installation of a back seat
   Removal and installation of the shelf under a headdress
   Removal and installation of blinds of back glass
+ Onboard electric equipment
+ Schemes of electric equipment
+ System of onboard diagnostics




Removal and installation of an external mirror

 REMOVAL

1. Remove facing of a door.
2. Uncover a high-frequency loudspeaker. Disconnect internal facing of a window (a tightening level) in a forward part of a window, without removing it completely. Remove foam-rubber isolation (triangular shape) from a loudspeaker.

3. Disconnect a loudspeaker (1), having shifted it up.

4. Unscrew the top screw (2).
5. Turn out the forward screw (3). For this purpose wring out rubber consolidation a little aside.

6. Remove an external mirror. For this purpose press through a cable with the plug and the plug through an opening at doors.


 INSTALLATION

1. Enter electric wires of the drive of an external mirror with the plug through an opening into doors.
2. Put an external mirror and fix it by two screws the moment of 5 Nanometers.
3. Insert a loudspeaker from above through a guide and fix by its moment 5 Nanometers.
4. Put into place foam-rubber isolation (triangular shape) of a loudspeaker.
5. Establish internal facing in a forward part of a window. Establish a loudspeaker cover.
6. Establish facing of a door.