Replacement of a slip / company inscription
Replacement of a slip
Adjustments fasten to the lower parts of a body plastic brackets.
|
1. Remove adjustments by hands or by means of a wide plastic wedge.
2. As a rule, at removal of a slip together with it plastic plugs with clips are removed. Therefore at first remove plugs from pins and insert them into openings of the corresponding elements of a body.
3. Straighten the deformed adjustments before installation.
4. Expose a slip with brackets according to openings and fix. If necessary strike with a palm. |
|
Replacement of a company inscription
|
1. Remove a company inscription from a body by means of thin nylon thread. For simplification grease thread with lubricant, and on the ends fix to wooden whetstones. |
|
2. Remove the glue remains alcohol or a cleaner, for example, "3M of Adhesive Cleaner".
3. Heat the hair dryer a new inscription to temperature about + 50 °C, remove protective paper and press on 10 with to a body. |
|
Replacement of an emblem of BMW
|
1. Carefully the screw-driver remove BMW emblem. Not to damage a covering, use fabric.
2. Before installation of an emblem apply sealant on its internal surface. |
|
|